B&R X67DM1321 X67 System I/O Module

Isolation voltage between channel and bus: 500 Veff
Nominal voltage: 24 VDC
B&R ID code: 0x1311
Sensor/actuator supply: 0.5 A total current
Status indicators:
I/O function per channel
Supply voltage
Bus function
Diagnosis:
Outputs: Yes, via status LED and SW status
I/O supply: Yes, via status LED and SW status
Connection technology:
X2X Link: M12 B-coded
Inputs/Outputs: 8x M8 3-pin
I/O supply: M8 4-pin
Power consumption:
I/O internal: 2.5 W
X2X Link supply: 0.75 W
Approvals:
CE
UKCA
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67
TÜV 05 ATEX 7201X
UL cULusE115267
HazLoc cCSAus244665
Electrical data:
Nominal voltage: 24 VDC
Voltage range: 18 to 30 VDC
Integrated protection function: reverse polarity protection
Digital inputs:
Input characteristics according to EN 61131-2: Type 1
Input voltage: 18 to 30 VDC
Input current at 24 VDC: typ. 4 mA
Input circuit: Sink
Input filter:
Hardware: ≤10 μs (channel 1 to 4) / ≤70 µs (channel 5 to 8)
Software: Default 0 ms, adjustable between 0 and 25 ms in 0.2 ms steps
Input resistance: typ. 5 kΩ
Additional functions: 50 kHz event counting, gate time measurement
Digital outputs:
Design: FET plus-switching
Switching voltage: I/O supply minus residual voltage
Rated output current: 0.5 A
Total rated current: 4 A
Output circuit: Source
Output protection:
Thermal shutdown in case of overcurrent or short circuit
Integrated protection for switching inductors
Reverse polarity protection of the output supply
Diagnostic status: Output monitoring with delay 10 ms
Leakage current when output is switched off: 5 µA
Switch-on time in case of overload shutdown: approx. 10 ms (depending on the module temperature)
Residual voltage: <0.3 V at rated current 0.5 A
Short circuit peak current: <12 A
Switching delay:
0 → 1: <400 µs
1 → 0: <400 µs
Switching frequency: resistive load max. 100 Hz
Braking voltage when switching off inductive loads: 50 VDC
Operating conditions:
Installation position: any Yes
Altitude above sea level:
0 to 2000 m: No restriction
2000 m: Reduction of ambient temperature by 0.5°C per 100 m

Protection class according to EN 60529: IP67
Environmental conditions:
Temperature:
Operation: -25 to 60°C
Storage: -40 to 85°C
Transport: -40 to 85°C
Mechanical properties:
Dimensions:
Width: 53mm
Height: 85mm
Depth: 42 mm
Weight: 190g
Torque for connections:
M8: max. 0.4 Nm
M12: max. 0.6 Nm