Keyence evaluation unit extension unit IX-1050

Model: IX-1050
Main unit/Extension unit: Extension unit

Display
Minimum display increment: 10 µm
Display range: ±999.99 to ±999 mm (4 selectable steps)

Tools
Scan mode: Height, step, max./min., height difference calculation, thickness calculation, height detection, B/W area detection, position correction
(Max. number of settings) Detection: 16 tools, position correction: 1 tool
Line mode: Height (average/max./min.), step (average/max./min.), height difference calculation, thickness calculation, position correction, tilt correction
(Max. number of settings) Detection: 16 tools, position correction: 1 tool, tilt correction: 1 tool

Additional functions
General: ZERO/offset, limit setting, 2-point calibration, measurement direction, position correction NG counter, zero/offset logging,
Capture mode (HDR) sensor date/time information addition, N.O./N.C. switching, I/O monitor, automatic brightness adjustment, illumination (ON/OFF),
Overall judgment conditions, NPN/PNP switching, simultaneous input signals for main unit/extension unit, interference protection, security
Scan mode: Measurement range, measurement position (small/standard/large), measurement mode, measurement noise suppression, imaging mode (high gain),
Tilt correction (fixed or real-time correction), highlight removal, trigger input (internal/external), trigger interval, trigger delay, trigger error,
Monochrome histogram, fixed reference plane, masking of interfering contours, rotation range
Line mode: Averaging, laser position correction, timing input, head tilt correction (fixed only), ambient light removal for measurement, HOLD function, alarm setting, measurement method (average/max./min.)

Input
Input: NPN/PNP selectable
For NPN: ON voltage 2 V or less, OFF current 0.1 mA or less, ON current 2 mA (short circuit)
For PNP: Maximum input voltage 26.4 V, ON voltage 18 V or more, OFF current 0.2 mA or less, ON current 2 mA (at 24 V)
Number of inputs: 8 (IN1 to IN8)
Function: IN1: External trigger/timing, IN2 to IN8: Enabled by assigning optional functions
Assignable functions: Program switching, stop laser/light emission, ZERO/offset, reset (error only), reset (status only), reset (status and error)

Output
Output: Open collector output; NPN/PNP switchable, N.O./N.C. switchable
For open collector output NPN: Maximum rated voltage 26.4 V, 50 mA (20 mA when used with an extension unit), residual voltage 1.5 V or less
For open collector output PNP: Maximum rated voltage 26.4 V, 50 mA (20 mA when used with an extension unit), residual voltage 2 V or less
Number of outputs: 10 (OUT1 to OUT10)
Function: Enabled by assigning optional functions
Assignable functions: Overall judgment result (all OK, one tool OK/NG), run, busy, error, position correction result, tilt correction result,
B/W area detection / height detection tool result (OK/NG), height / height difference / max./min. / calculation tool result (OK/NG/HIGH/LO), alarm
Analog voltage output: Not available
Analog current output: Not available

Number of programs: 32
Statistical information: Scan mode: Measured value / degree of match (max., min., average),
Processing time (latest, max., min., average), count (number of OKs / number of NGs / number of triggers)
Line mode: Measured value / degree of match (max., min., average), count (number of OKs / number of NGs / number of triggers)

Detection history
Stored history: 100
Storage conditions: Selectable from NG only / all

Ethernet
Standard type: Not available
Connector: Not available

Interface compatibility: CC-Link / DeviceNet® / EtherNet/IP® / EtherCAT® / PROFINET / PROFIBUS / TCP/IP / RS-232C / BCD output
Number of connectable units: Main units: 1, extension units: 1, communication units (DL): 1

Ratings
Supply voltage: Supplied via main unit
Current consumption: Max. 1.9 A or less (main unit only: 0.8 A or less, with unit extension: 1.9 A or less) (without output load)

Environmental resistance
Ambient temperature: 0 to +50°C (non-freezing)
Relative humidity: 35 to 85% RH (non-condensing)
Material: Housing: polycarbonate / Power connector: PA, POM / Analog output connector: PA, POM / I/O connector: PA /
Sensor head connector: zinc plating + Ni coating, PA / Ethernet connector: copper alloy + Ni coating / Rear heat sink: aluminium /
DIN rail mounting bracket: POM / Nameplate: PC
Weight: Approx. 190 g