Euchner transponder-coded safety switch CTP-L1-AR-U-HA-AZ-SH-123362

Operating range
Repeat accuracy R per
EN 60947-5-2: 10 %

Electrical connection values
External fusing
(operating voltage U_B): 0.25 ... 8 A
External fusing (solenoid operating voltage IMP): 0.5 ... 8 A
Connected load: 6 W
Rated insulation voltage U_i: 50 V
Rated impulse withstand voltage U_imp: 0.5 kV
Operating voltage DC U: 24 V DC -15% ... +15% reverse-polarity protected, regulated, residual ripple < 5 %, PELV
EMC protection requirements: per
EN IEC 60947-5-3
Utilization category DC-13: 24V 150mA
Solenoid operating voltage DC U_IMP: 24 V DC -15% ... +10% reverse-polarity protected, regulated, residual ripple < 5 %, PELV
Solenoid duty cycle ED: 100 %
Risk time per EN 60947-5-3: max. 260 ms
Risk time per EN 60947-5-3, extension for each additional device:
max. 5 ms
Switching capacity per UL: 24V DC, Class 2
Protection class EN IEC 61140: III
Current consumption I_UB: 40 mA
Current consumption I_IMP: 400 mA
Test pulse duration: max. 1.0 ms
Test pulse interval: min. 140 ms
Degree of contamination
(external, per EN 60947-1): 3
Signal output OD, OI, OL
Output type: p-switching, short-circuit proof
Output voltage: 0.8xUB ... UB V DC
Switching current: 1 ... 50 mA
Safety outputs FO1A / FO1B
Output type: 2 semiconductor outputs, p-switching, short-circuit proof
Output voltage
LOW U(FO1A) / U(FO1B): 0 ... 1 V DC
HIGH U(FO1A) / U(FO1B): UB-1.5 ... UB V DC
Discrepancy time of both safety outputs: max. 10 ms per EN IEC 60947-5-3
Switch-on time: max. 400 ms
Residual current I_r: max. 0.25 mA
Switching current per safety output
FO1A / FO1B: 1 ... 150 mA

Mechanical values and environment
Approach speed: max. 20 m/min
Connection type: 1 connector M23,
19-pin, RC18
Extraction force: 20 N
Readiness delay: 8 s
Actuation force: 10 N
Mounting position: any
Switching frequency: max. 0.5 Hz
Mechanical service life: 1 x 10⁶
Overtravel: 5 mm
Retaining force: 20 N
Shock and vibration resistance: per
EN IEC 60947-5-3
Degree of protection: IP67
Ambient temperature at
U_B = 24V DC: -20 ... +55 °C
Material
Switch head cover: zinc die-cast
Safety switch housing: glass-fibre-reinforced thermoplastic
Locking force F_max: 3900 N
Locking force F_Zh: 3000 N
Locking principle: de-energise-to-lock